This is a Vintage style, upgraded ES-335 Pre-wired Harness for Gibsons, Epiphones and 335 style Imports.
This is a quality vintage style 1950's era Gibson ES-335 pre-wired kit with 500k CTS pots, Switchcraft short straight 3-way toggle switch, Switchcraft jack, Sprague 715P Orange Drop capacitors 200V (.022mf), and vintage style 50's authentic braided shield wire.
This is a great upgrade for any ES-335, ES-330, Epi Dot or 335 import guitar. You will hear the difference! The harness has been bench tested on a guitar in my shop and guaranteed to work 100%.
The Harness Includes:
4 CTS 500k Split Shaft Audio Pots:
2 Sprague Orange Drop 200v .022mf Capacitors
Vintage-Spec Braided Shielded Wire:
wrapped with shrink insulated tubing
(Long Thread) Jack:
Switchcraft is widely considered the finest input/output 1/4" jack available.
1 Switchcraft 3-Way Toggle Switch:
Standard short straight toggle switch. (Long Thread)Assembly Template.
Used for shipping purposes and is the correct alignment for your 335. You will notice that the Caps are not centrally located between the Pots. The reason for this is so when you install the kit, you see the minimum amount of wiring and electronics through the F hole.
This a pre-wired kit
. The pots, caps, jack, and 3-way toggle are pre-soldered for you (50's style). All that you need to do, is solder your pickups, and bridge ground wire and that’s it. I will also send you a link to my online wiring diagrams.I can also build this harness using 500k mini pots which make it a lot easier to install the harness. On some Epi Sheraton II and Epi Broadway's, regular size pots will not go through the F holes, so you will need the mini pots. There is a $4 upcharge. Please contact me if you would prefer the mini pots.