WD Music Maple Stratocaster Neck with Maple Fretboard This is a FENDER Licensed Guitar Neck
MODEL #: SM .
This is a Brand New Factory First. Made in the USA. This neck has a nice grain pattern and is an excellent neck for replacement or new project installations.
We have upgraded this neck:-
1. Spot leveled and dressed the frets.
2. Dressed the Fret Ends and Tangs.
3. Supply and install a Graph Tech Nubone Tusq Nut
These pictures are from a neck I sold recently
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius Maple Fretboard.
The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machines
A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®.Features:
Quality Maple Neck with Maple Fretboard
C - shape Neck Profile with a modern 12" Radius
22 Medium Jumbo Frets
1-11/16 Nut Width (Modern USA Fender width)
10 mm tuner holes
25 ½” Scale Length
Clear thin Satin finish
Double Action Truss Rod adjusting at the Headstock
Shipping is by Priority Mail (1 - 3 days) to the lower 48 States (includes Insurance)
WD Music make some of the best Guitar Necks on the market and we go the extra mile to upgrade it before selling.
There will be some fine tuning needed after the neck is mounted to the body and strung to pitch. String height and truss rod adjustment will then need to be set, as it is not possible before mounting the neck. For that reason, although I have installed the nut, I don’t glue them in.
Please Note: Spot leveling is not the same as full fret leveling. There is always a possibility that there may be a slight chance a fret not being 100%. What it will be, is, a lot better than it was, with an improvement of 90 to 99%. Spot leveling is a free courtesy option that we do. A full fret level would normally add another $100 to the price.